islandroad83 has just uploaded Stock 0IA0S E61 2008 XI AT!
islandroad83 has just uploaded Stock 0IA0S E61 2008 XI AT! Stock 0IA0S E61 2008 XI A
View ArticleClik here to view.
Got my Blackstone oil analysis report back....
Since I do a lot of experimenting and run a fairly non-standard setup, I sent my oil out for analysis. Various specs on the car that may influence these results: BMS DCI ER oil cooler Runs on 100% E85...
View ArticleSTFT Banks 1 & 2 - What is normal ?
Is it normal for STFT Banks 1 and 2 to be off from each other, and by how much is considered normal ? http://www.datazap.me/u/buraq/beastm...ata=2-13-14-15 The only thing I found when searching was...
View ArticleClik here to view.
E85 single turbo 6466 logs
Finally decided to save a couple logs on straight E85 to post up. 6466 custom single turbo 22/23psi E85 Meth flow starting at 5psi and not full flow in these logs.. ill try to get some later with full...
View ArticleMSD81 Engine Loom : Where are the knock sensors?
As in the title, trying to track down the knock sensors on the wiring loom.
View ArticleAnother single kit in the works.
I'm going to be fabbing up a top mount s372 T4 kit on my friends 335i. I am very familiar with tunerpro and EFI tuning priciples, since I have been tuning EFI systems for well over 10yrs. I have a BT...
View ArticleClik here to view.
half axle help...
Didn't think I had enough to do this...but my right axle let go last night, best part was i was out of town and had to leave the car 2 hours away. I've searched and seen plenty of info but wanted to...
View ArticleCalling all spec 3+ owners
Hey guys so I just got my car back yesterday from having the Spec stage 3+ clutch and Steel SMFW installed and I have a few questions. So first of all my pedal is pretty stiff. I wouldn't say it is...
View ArticleHPFP upgrade update
As many of you guys know we are and have been working on a HPFP upgrade for quite sometime now, most of you also know we have the solution working on our shop car. Just wanted to post a small update...
View Articlen54 heads lifting
At what tq or horsepower could we expect the heads to start lifting on a stock n54? On straight e85 and 24psi with meth I'm around 700whp or so and lots of torque After logging the other night and...
View ArticleClik here to view.
Xdrive Front Diff Leak?
It looks like i have at the front differential. I snapped some pics while i had the intake off from the top of the car: I am thinking that is probably the axle seal as the top of the axle seemed to be...
View ArticleCOBB ATR FAQ/Tips/Tricks Thread
I think it's a good idea to start this. If you have anything to contribute with your experiences using ATR post them in here! Here are some I've picked up: 1. To disable lean spool across the board,...
View ArticleClik here to view.
WALBRO 455 ADAPTERS made!!
In case you guys have missed the pics in 3000gt MR thread here it is. Made some extras all info can be found on Terry's site. I cannot mention anything about sales or anything like that as I don't want...
View ArticleI need help..
I know everyone has seen misfire threads over and over but I screwed up my downpipe install and I dont know how. I emailed terry my logs but wanted to see if anyone here had an idea first. The car was...
View ArticleClik here to view.
6466 spool on e85
6466 meth and str8 e85 look at thet spool son.. at or before 4000 rpm. yessir Attached Images
View ArticleBlown n54's
What would these two blown motors I have be worth to anyone? Im tired of this car and want to get these motors out of my way in my shop for my new car.
View ArticleP30BB fault code while logging
I was doing some logs this past weekend when all of a sudden my dash lit up. Pulled over and these were the codes I got: P30BB ( injector, power level 2 ) P29D1 ( misfire, cylinder 5 ) P29D2 ( misfire,...
View ArticleBBFlash maps for the FBO 335i
Searched but haven't found anything yet - wondering is there any maps for the FBO n54 to flash with BBflash or it's only used to flash backend map to work with JB4?
View ArticleNew turbo needed/turbo seals are gone?
Please tell me it ain't so! https://www.dropbox.com/s/ypxz39h4ca...416_192320.mp4
View ArticleN54 DCT guys who want an upgraded and higher quality metal oil pan
Thought you might want to look in here since few of you check the S65 section: http://www.germanboost.com/showthrea...-Introduction*
View Article