Open Flash OTS Boost 18 psi STOCK HARDWARE?
So people on e90post are drooling over the numbers made on stock hardware. The numbers are impressive but they are running 18 psi which to me seems very aggressive on stock hardware. Of course we would...
View ArticleWhere can I buy male-male methanol compression fitting?
Sprung a leak right where the 6mm AM hose enters the engine bay, by my catch can. Is anything available similar to subject fitting?
View ArticleClik here to view.
lower CR piston..
what r the benefits of lowering the CR, let's say the stock CR is 10.2 on 20psi if i lower the CR to 9.6 at the same boost 20psi? any gains?:think: :think:
View ArticleNeed Help with Oil Specs/brands
Recently traded a Corvette for an 08 135i. It is my first ever experience with a BMW and Was the best trade I ever made. I never thought that a car can be that much fun to drive and perform that well....
View ArticleClik here to view.
09' e92 335i performance project VTT S2 B2 countdown!
Hey guys, I decided I would like to start a thread on my own personal project. I have done my best to contribute where I can on this forum, and would like to continue to do so. Please feel free to...
View ArticleClik here to view.
New Cobb Accessport Version 3 (V3)
Anyone know anything about it? Sure we will be hearing a lot in the coming days @Josh@Cobb:
View ArticleTial Spring Help
I have a tial q with a cpe charge pipe. I purchased it used it came with a hot pink spring (supercharger):crazy:. I measured the vac on my car at idle and it is around 18-20 with the a/c off around 15...
View ArticleVTT S2B2 Clutch
Since I decided we need another VTT B2S2 thread, I thought I'd pose this question to the community Mods: JB4 G5, BMS Backend, Meth, Catless DP, HPF FMIC, DCI I doubt the stock clutch will last on the...
View ArticleClik here to view.
Vargas Vendor Review - Stage 0 Replacement Turbos (No dyno.)
With 48k on the clock the OEM turbos died shortly after dialing up the boost to 19 PSI. It was time for replacements, but I wasn't ready to sink the cash into a twin scroll, going the economical route...
View ArticleFirst time to the track this season 12.3@115 in 335xi AT
Finally got some time to go to the track this year and unfortunately its been really hot an humid this past weekend but was able to go to Union Grove, IL and get some runs in at Great Lakes Dragaway....
View ArticleSiemens Sensor used in Procede FlexFuel
Hello, can anyone with the Procede flexfuel kit let us know the part number from the Siemens sensor they're using?
View ArticleOpen Flash OTS Boost 18 psi STOCK HARDWARE?
So people on e90post are drooling over the numbers made on stock hardware. The numbers are impressive but they are running 18 psi which to me seems very aggressive on stock hardware. Of course we would...
View ArticleWhere can I buy male-male methanol compression fitting?
Sprung a leak right where the 6mm AM hose enters the engine bay, by my catch can. Is anything available similar to subject fitting?
View ArticleClik here to view.
lower CR piston..
what r the benefits of lowering the CR, let's say the stock CR is 10.2 on 20psi if i lower the CR to 9.6 at the same boost 20psi? any gains?:think: :think:
View ArticleNeed Help with Oil Specs/brands
Recently traded a Corvette for an 08 135i. It is my first ever experience with a BMW and Was the best trade I ever made. I never thought that a car can be that much fun to drive and perform that well....
View ArticleClik here to view.
09' e92 335i performance project VTT S2 B2 countdown!
Hey guys, I decided I would like to start a thread on my own personal project. I have done my best to contribute where I can on this forum, and would like to continue to do so. Please feel free to...
View ArticleClik here to view.
New Cobb Accessport Version 3 (V3)
Anyone know anything about it? Sure we will be hearing a lot in the coming days @Josh@Cobb:
View Article