RENNtech DCT 335is 11s after 11s
:music-rockout: Special thanks to Lenny@ Renntech Ryan @ aFe Power Storm @ cP-e Thomas @ Renntech and no, I am not done, consistency was the objective here, now time to start working on the speed traps...
View ArticleI just did 60-130 in 7.555 sek RB turbos full weight E92 335i with PFT E50...
Well it finally got dry enough so I don't totally spin my winter tires in 3rd gear, and then I found a 2.6% slope as well. Seemed to work out great. I did a 100-200 kmh in 6.575 s and a 60-130 mph in...
View ArticleQuafie Whine Question
After installing my VAC built Quafie last weekend, I have a slight high pitched whine when under light decel (engine braking in 6th at 70mph) or slight accel (cruise control on the interstate). It is...
View ArticleUpgraded Stett oil cooler SS lines (pics)
My old stett stage 2 oil cooler lines started leaking a bit from the fittings so I called "Chad" and he madfe these for me. They are top notch in every way! Here they are: I modified the canisters to...
View ArticleAutomatic Transmission Malfunction
Hello, I just got my first BMW. It is a 2007 335i with an automatic transmission (it has 77,000 miles on it). Anyhow, when I put it into manual shift, I can shift through the first four gears, and then...
View ArticlePhoto Contest + ar design N54 Downpipe Giveaway!
Win a set of ar design downpipes!!! ar design's sister company Alpha Motorsports is holding a Facebook photo contest with the winner getting a free set of our N54 catless downpipes! All you have to do...
View ArticleI just did 60-130 in 7.555 sek RB turbos full weight E92 335i with PFT E50...
Well it finally got dry enough so I don't totally spin my winter tires in 3rd gear, and then I found a 2.6% slope as well. Seemed to work out great. I did a 100-200 kmh in 6.575 s and a 60-130 mph in...
View ArticleQuafie Whine Question
After installing my VAC built Quafie last weekend, I have a slight high pitched whine when under light decel (engine braking in 6th at 70mph) or slight accel (cruise control on the interstate). It is...
View ArticleUpgraded Stett oil cooler SS lines (pics)
My old stett stage 2 oil cooler lines started leaking a bit from the fittings so I called "Chad" and he madfe these for me. They are top notch in every way! Here they are: I modified the canisters to...
View ArticleAutomatic Transmission Malfunction
Hello, I just got my first BMW. It is a 2007 335i with an automatic transmission (it has 77,000 miles on it). Anyhow, when I put it into manual shift, I can shift through the first four gears, and then...
View ArticlePhoto Contest + ar design N54 Downpipe Giveaway!
Win a set of ar design downpipes!!! ar design's sister company Alpha Motorsports is holding a Facebook photo contest with the winner getting a free set of our N54 catless downpipes! All you have to do...
View ArticleN54 Short Shift - Myth?
Hi Folks, I hear pretty frequently about people who short shift the N54 because it runs out of steam at the higher RPMs and the power band drops off. When you look at a dyno, I can totally understand...
View ArticleAny experience with Okada Plasma Direct ignition coils ?
Hi, RB 6MT FBO here. I am looking to change the coil packs on my car. I don't have any problem with mine (aside from a rumble in the exhaust - or diff :) - at lower RPMs which a tuner said it could be...
View ArticleOn Dyno - Which wire for RPM pickup? - N54 E85 results
I'm on the dyno now but we can't find an rpm pickup wire. Are the coil wires the ones on the passenger side front? I didn't bring my tools, so I can't take off the valve cover to verify. Attached...
View ArticleStage 2 shipped!
At long last, well maybe not that long, we have shipped our first sets Stage 2 beta's. 4 sets have gone out, 1 set is still here to be be installed on Mike's car this week and one more set is going to...
View Article+110 whp and +130 wtq for under $2K
Today I finally had a chance to dyno my FBO pro tuned Cobb. I am very happy with the car and the results. The tune is spot on with solid A/F's, big thanks to @dzenno@ProTUNING Freaks. My mods are Cobb,...
View ArticleDiscussion purposes only... N54 rev limit - 7500 too high?
Obviously there's no point in running an N54 to 7500 with stock turbos or even RB/VTT stock-frame turbos, but if you're running a single turbo or potentially stage 3 VTT's, would the engine have any...
View ArticleRenntech N54 camshafts
Quote: Originally Posted by BuraQ Yes please PM him ! :awesome: Would love ripping that ST ET time to shreds And, add a set of this custom N54 camshaft done a while back =) Attached Images
View ArticleIf you have a stett oil cooler you should do this
I am sure somone has done this but I wanted to post some pics of this easy mod. I was so sick and tired of my Stett stage 2 oil cooler 90 degree hose ends at the thermostat being right on top of...
View ArticleForcing Exhaust Flap to closed position
Ok so we have the Jb4 CANflap feature to keep the flap open, but I'm looking to setup a solution to also be able to force it into the closed position. So basically a switch that can be used to switch...
View Article