Hey guys!
Post up some of your Custom Oil Catch Can setups (Pictures Are Worth A Thousand Words).
Some of us know we have to do it but are on the fence as far as which setup to use.
So we've established that we NEED to plug the PCV ports in the head, remove the Flapper and we've also seen that AD Engineering @andy_divers makes some pretty sweet fittings that make for a super clean install.
Try and post as much knowledgable info as you can.
Here I'll Start with @robc1976 's:
DIY Custom OCC with AD Engineering Fittings
http://www.bimmerboost.com/showthrea...ering-Fittings
Post up some of your Custom Oil Catch Can setups (Pictures Are Worth A Thousand Words).
Some of us know we have to do it but are on the fence as far as which setup to use.
So we've established that we NEED to plug the PCV ports in the head, remove the Flapper and we've also seen that AD Engineering @andy_divers makes some pretty sweet fittings that make for a super clean install.
Try and post as much knowledgable info as you can.
Here I'll Start with @robc1976 's:
DIY Custom OCC with AD Engineering Fittings
http://www.bimmerboost.com/showthrea...ering-Fittings