Fuel-It! Scratch and Dent sale

UPDATE: All of these pump assemblies are sold and have shipped. Thanks!


We have three pump assemblies that don't conform to our specs for aesthetic reasons. All three have just been upgraded but due to the differences we don't feel we can sell them on the website. So here is the deal.

The first two are Stage 2 pumps for the E8X or E9X. They were trade-ins that had been Stage 1's. Consequently they have an extra rivet to plug the pump retention hole and the power wires are routed differently. Other than that they are like any other Stage 2 upgrade and were bench tested and met all the same specs any other Stage 2 pump has to meet.

They will be sold for $405 + $20 shipping (international is 49.99). However there is no core deposit. So if you don't have a stock pump or are international, here is your chance to upgrade. If the buyer chooses, they can send back there unaltered an undamaged pump and get a $100 credit back.

Here are the two pumps that are available.






The third pump is for an E60.

This is a newly built Stage 2 that would be a "Trade-In" but this one had a cracked fitting. It doesn't really affect anything but we can't just sell it as we normally would. So here is the deal on this one.

If you have a previously modified pump or want to send your core back to save some money...this is for you. ;)

You can see from the picture a piece got broken off during the removal process. It doesn't affect anything and we tested it just like normal and the electrical fitting is unaffected.

This pump assembly will be $480 + $30 shipping and that includes the ring removal tool. Same rules apply, no core deposit but if you send back your stock pump and doesn't have any damage, we'll credit you back $100, so your upgrade was $380 + shipping. :)

Here's a pic of the damage to that pump assembly.



First come, first served and when they are sold, they will be removed from the ad.

Thanks!