Our customer @jzeee037 got his car on the dyno today. This is a zero revision tune, I had Dzenno take one of my older Stage 2+ flashes and back it way down as a good starting point. He flashed it in, and adjusted boost targets in the JB himself while on the dyno. He had no tuners helping him out today, as Terry was busy and Dzenno wasn't able to get home in time. Here is the graph, and log. Notice even on this zero revision tune, 12.7 timing up top, ZERO corrections the whole way, and power never levels off, just keeps climbing to redline(we made our 640+WHP runs at 15.5 degrees, and way more boost 28-25 psi boost curves, this was a 21-22 psi curve, it over boosted to 23.6 psi, and made the 550, the lower tq was due to not requesting the big boost down low like we do, he actually tapers up, low boost down low 21 up to 22. He ended up with 558/510 after a little more tweaking of boost with the same 23 psi up top. If he threw in 28 psi down low like we do, and asked for 24-25 psi at redline. I have no doubt he would be looking at 600+/600+. Very solid results for his first time on the dyno, with little to no tuning . Looking forward to some more tuning, and race videos!
↧