Non US cars flashing issues workaround

There's been some problems when flashing non US-spec cars with US bin files. Files work but there's some persistent fault codes about DMTL pump (non US cars doesn't have one), coding missing, etc.

If you use TunerPro Difference Tool and copy all of the defined values from the modified bin to the the copy of your original bin, the car wont start.

That's because the Load Target tables are not identical.

US and EU Load Target 1 RPM






US and EU Load Target 1





As you can see the US Load Target header begins from 1775 and EU values from 1300.

The solution is to copy the defined items which differ without Load Target # RPM and Load Target # values. You have to change the Load Target # values manually to your bin. If you're not familiar with these values, just leave the value under the 1300 header to stock and copy rest of the values from the modified bin.

I hope this helps you non US car owners. At least, this workaround solved my non compatible flash issues. I do not guarantee that it's the case with every car. And as normal, I don't take responsibility if you brick your car by modifying these values.

Attached Images