So I found a very real problem with one of the waste gates sticking open sometimes.It required pulling a lot of stuff off to get it fixed but I got it done in time for the dyno. As you can see spool is way up and its spooling much better with no tuning changes except Me and D did a few street pulls last night to make sure boost control was still ok. Pulled onto the dyno today did a pull. Were just gettin started today...:)
Ps. We did smoothing 0 to keep it consistent with that other guy. But all graphs wil be posted on both 0 ad 5 smoothing. Also we will stretch out graphs out to 12 inches by 3 inches once we are done too keep everything on the "up and up"
Ps. We did smoothing 0 to keep it consistent with that other guy. But all graphs wil be posted on both 0 ad 5 smoothing. Also we will stretch out graphs out to 12 inches by 3 inches once we are done too keep everything on the "up and up"